The effect of Nd3+ concentration on fabrication,microstructure, and luminescent properties of anisotropic S-FAP ceramics

Nd³⁺ doped strontium fluorophosphate (S-FAP), with chemical formula Sr₅(PO₄)₃F, nanopowders were prepared using the co-precipitation method. The prepared powders had no impurity phase with a grain size of about 30 nm and the doping limit of Nd³⁺ ions in strontium fluorophosphate is about 9 at.%. The morphology and particle size were determined by the doping concentration of Nd³⁺. Anisotropic Nd: S-FAP transparent ceramics with different Nd³⁺ doping concentrations were fabricated successfully by the simple hot-pressing method. The grain size of prepared S-FAP transparent ceramics decreased first and then increased with the increase of Nd³⁺ concentration. The 2 at.% Nd: S-FAP ceramic presented the highest optical transmittance at all wavelengths range. The characteristic transitions from the ground state to the excited states of Nd³⁺ ions were observed from the absorption spectra, and the absorption cross-section was calculated at 3.71 × 10^–20 cm². The influence of Nd³⁺ ion concentration on luminescence intensity and fluorescence lifetime was studied under 796 nm excitation. The strong emission of ⁴F_3/2→⁴I_9/2 transition in Nd: S-FAP was calculated by Judd–Ofelt (J-O) theory.     

发挥设备专业化优势探索项目建设设备综合管理标准化工作

设备综合管理工作始终贯穿在项目建设整个过程中.从项目立项审查、基础设计审查、设备订货前的技术把关,到工程施工环节的专业技术检查,再到项目中交、联动试车、投料试车,处处可见设备综合管理的内容.本文梳理出设备综合管理的主要节点内容、现状和存在的问题,针对镇海基地项目群的建设,就如何发挥设备专业化的优势、如何对设备综合管理工作进行创新、如何优化工作流程进行了探索.旨在通过设备综合管理工作的统筹和协调,将专业化优势形成合力,更高质量、更高效率地为项目建设服务.     

Spinel CoFe2O4 /carbon nanotube composites as efficient bifunctional electrocatalysts for oxygen reduction and oxygen evolution reaction

In the development of fuel cells, it is the key to large-scale commercialization of fuel cells to rationally design and synthesize efficient and non-noble metals-based bifunctional electrocatalysts for oxygen reduction reaction (ORR) and oxygen evolution reaction (OER). In this paper, spinel CoFe₂O₄/carbon nanotube composites (CoFe₂O₄/CNTs/FA) were synthesized by solvothermal and calcination method. XRD, TEM, XPS and BET characterizations indicate that the addition of complexing agent fumaric acid can improve the crystal growth kinetics and morphology of CoFe₂O₄/CNTs nanohybirds. The as-synthesized CoFe₂O₄/CNTs/FA pyrolyzed at 500 °C have an outstanding bifunctional catalytic activity for ORR and OER with the potential of 1.62V (vs. RHE) at a current density of 10 mA/cm² and half-wave potential E_1/2 = 0.808V (vs. RHE) in alkaline electrolyte, respectively. It is obviously better than unloaded CoFe₂O₄ nanoparticles and commercial CNTs. CoFe₂O₄/CNTs/FA also exhibit better methanol tolerance ability and durability than commercial Pt/C and RuO₂ catalyst. This investigation broadens an idea of simple compounding of spinel with carbon-based materials to improve electrochemical properties.     

锯齿错列肋片尾气换热器的热电性能优化

由于尾气传热性能差,尾气余热热电转换系统中常采用具有强化换热结构的尾气换热器,其中,锯齿错列肋片式是常见型式之一.但如何平衡传热性能和流动阻力实现对换热器内部结构和整体尺寸的优化,使得热电系统获得总的净输出功率最大,是值得研究的内容.但现有成果均是基于限定尺寸结构,对换热器局部尺度及热电性能进行分析,没有针对强化换热器的整体优化结构和最大净输出功率展开研究.建立基于汽车尾气余热回收的热电转换数值模型,结合场协同理论,分析锯齿错列肋片式尾气换热器内部肋片结构对热电功率的影响.此外,综合考虑传热性能与流动阻力的平衡,以热电转换最大净输出功率为优化目标,对热电模块结构进行优化,并获得热电系统的相应最优性能.研究结果表明,固定热电模块尺寸时,净输出功随肋片高度增加明显增加,但受肋宽影响较小;对热电模块尺寸进行优化时,肋高和肋宽的变化均对热电模块的最优尺寸产生较大影响,单位面积最大净输出功随肋宽增加而明显降低,但受肋高的影响较小.     

纳米零价铁材料对放射性核素的 去除及机理研究进展

随着人类社会的发展，放射性铀矿的开采和使用越来越多，环境面临着越来越严重的放射性污染问题。从生物和环境的角度来看，有效地清除环境中的放射性核素是核能利用过程中最重要的问题之一。纳米零价铁（nanoscale zero valent iron, nZVI）具有较大的比表面积和较高的活性位点，能显著提高放射性污染物的修复效率。本综述的目的是展示nZVI基材料对放射性核素的高效去除能力和环境修复作用。简介了常用的nZVI基材料（表面改性或多孔材料支撑的nZVI材料）及其对放射性核素的去除效果和相互作用机制（如吸附和氧化还原）。最后，对nZVI材料的应用和挑战给出个人见解。本综述有助于为高效去除放射性核素的nZVI材料的设计指明方向，为放射性核素的高效处理处置提供新材料。     

环形通道内液态铅铋合金流动换热特性实验研究

通过对环形通道内液态铅铋合金的流动换热特性进行实验研究，得到了气泡泵注气对液态金属流动的影响，并拟合出环形通道内液态铅铋合金的摩擦系数关系式和换热特性关系式。结果表明：采用气泡泵注气能有效提升铅铋合金的质量流速；相同Reynolds数下环形通道内液态铅铋合金的摩擦系数大于由布拉休斯公式计算得到的摩擦系数；液态铅铋合金对流换热过程中，导热项占主导地位，并且Nusselt数随Peclet数的增大而增大。     

激光刻痕对取向电工钢磁畴和铁损的影响

为了研究激光刻痕工艺参数对取向电工钢表面的磁畴形貌、刻痕线宽度和铁损的影响规律，开展了激光刻痕工艺试验。结果表明，激光刻痕后取向电工钢表面的磁畴宽度明显细化，且随着输入电流的增加，磁畴宽度先减小后增大；刻痕线宽度随着输入电流的增加而增大。对于本次试验样品，通过对比分析，确定最佳激光刻痕工艺参数为电流为 12 A，激光频率为 5 kHz，刻痕速度为 800 mm/s，该参数下铁损改善率可达 11.81%。